CEBOS CEBOART Model

Description

-

   See the ONDA effect demonstration video

   See SPATULATE effect demonstration video

   See the video demonstrating the BURNED effect

-

Spatula effect: apply the product with a stainless steel trowel, evenly over the surface: then achieve the presented aesthetic effect by working with the trowel in crossed, irregular strokes. Before complete drying, rub the surface again in order to slightly flatten the raised parts. If the product is too dry, wet the trowel with water.

-

Cracked effect: apply the product with a stainless steel trowel, in an even thickness of 1.5-2 mm. While the product is still wet, work the surface with the CeboSign tool. For a more natural effect, proceed in an irregular manner, avoiding repetition of the design. Before the product is completely dry, smooth the surface with the squeegee, lightly flattening the raised parts. If the product is too dry, wet the squeegee with water.

-

Wave effect: apply the product with the special Onda squeegee, in an even thickness of 1.5-2 mm, either vertically or horizontally depending on the desired effect: then rework the surface with the shaped side of the Onda squeegee, following the direction of application. Before complete drying, rub the surface again in order to slightly flatten the raised parts. If the product is too dry, wet the trowel with water.