Mould? Don't panic! Here's how to beat it forever

Mould is a common problem in many homes, creating unsightly black spots and an unpleasant smell.
Not only that, it can be harmful to health, causing allergies and respiratory problems.

Fortunately, there are effective products for fighting mould e prevent its reappearance.
Sikkens offers effective solutions to treat contaminated walls, help prevent mould growth and reduce condensation, thus improving living comfort.

How to eliminate mould with Sikkens

Sikkens offers effective solutions to improve living comfort and help prevent mould growth in 2 simple steps:

1) APPLY THE MOST SUITABLE SIKKENS FINISH TO PREVENT THE REAPPEARANCE OF MOULD

First of all, the affected surface must be treated with the disinfectant Sikkens ALPHA DESINFECTOR BPwhich is a suitable solution for treating wall surfaces contaminated by mould and algae both inside and outside the home.
The solution, which acts in depth, cleaning the treated surfaces with maximum effectiveness, is applied directly on contaminated walls and walls.

• Preparation: Before applying the product, it is essential to clean the surface of dust, dirt and grease. Wear gloves and a mask to protect yourself during use.
• Application: Apply Alpha Desinfector evenly and generously to the surface affected by mould with a brush.
• Removal: After waiting, brush or sand to remove mould
• Drying time: Allow to dry for at least 1-2 hours.

If the mould is very deep, it may be necessary to reapply Sikkens Alpha Desinfector BP on the already treated areas and wait at least 6 hours

2) ALPHA TEX SCHIMMELWEREND SF o ALPHA SCHIMMELWEREND SF

After applying the Alpha Desinfector, the finishing coats must be applied. Sikkens offers two different products: Alpha Tex Schimmelwerend SFbreathable, ideal for bathrooms, kitchens and ceilings and Alpha Schimmelwerend SFwashable, ideal for living rooms and bedrooms. Both water paints are mould-resistant and solvent-free. Pack sizes are 2.5 and 10 l with a yield of 12/14 m²/l per coat (Alpha Tex Schimmelwerend SF) or 5 and 10 l with a yield of 14 - 16 m²/l per coat (Alpha Schimmelwerend SF).

• ApplicationApply 2 coats with an interval of at least 3-4 hours between each coat.
• Completion: It is preferable to ventilate rooms frequently to prevent the reappearance of mould.

The available colours are white and light shades, perfect for any type of environment.

Conclusions

Mould is an unpleasant and health-damaging problem, but it can be combated effectively.
Products Sikkens Desinfector BP e Schimmelwerendcombined with proper moisture management in the home can help you achieve a healthy, mould-free environment.